Craft Apps Guide

Make your first texture in TextureCraft

TextureCraft is for painting PBR materials onto a model in layers, then exporting texture maps. For a first task, use a model you own with UVs, add one clearly visible color mark and check the export on the same model. The official product page describes its 3D and 2D views, texture sets, layers, masks, baking and map export; the steps below turn those parts into a bounded result check.

Prepare the model and target

Keep the original model untouched. Choose a small mesh with a visible front and one simple material. For a controlled first task, use a model whose UVs you can inspect. Record the file format, UV set, target renderer or engine, and the resolution you need. TextureCraft's official page lists glTF, FBX, COLLADA, USD, Alembic, OBJ, PLY and STL as inputs, and PNG, JPEG, TGA, TIFF and EXR among outputs. Its official repository says a new project can generate UVs for a mesh that has none. Inspect that generated layout before painting; a listed input format alone does not establish that your particular model imports as intended.

Input checkWhat to confirm before painting
GeometryThe intended mesh is visible and oriented correctly.
UVsConfirm the existing UV layout, or inspect the UVs TextureCraft generates for a model that has none.
Texture setThe expected material/texture set appears for the mesh.
Output targetYou know which channels and file format the receiving tool expects.

Paint one result you can recognize

  1. Import the model and check the 3D view against its 2D UV view. Note missing geometry or texture sets before adding paint.
  2. Create a paint layer and put one contrasting mark on a distinctive part of the model. Check the same mark in the 2D UV view. This small mark is easier to verify than a complex smart material.
  3. Save the editable work as a .tcraft project before exporting flat maps. The official repository identifies .tcraft as its project format. Preserve the original model separately.
  4. Export base color, then the PBR channels your target actually reads. Record each output filename, channel, resolution and format. A base-color image alone is not a complete PBR material for every engine.
  5. Load the model and exported maps into the receiving viewer or engine. Confirm the mark appears in the expected place; inspect seams, channel assignment and normal orientation. If the mark shifts, check UVs and texture-set choice before repainting.
Symptom in the receiving toolCheck first
Mark is missingCorrect model, material slot, base-color file and texture set.
Mark is in the wrong placeUV layout and the texture set used at export.
Surface looks flat or invertedWhether the target expects the exported normal/roughness channels and their convention.

This is a practical inspection sequence, not a claim that every listed model type has been tested on this site. For making a tileable material from a node graph before applying it to a model, read MaterialCraft. For TextureCraft's position, downloads and development status, read its application guide.

Sources